전문 텅스텐 스틸 석재 조각 수공구 세트, 석재 조각 치즐 세트, 목공 조각 도구, 3 개
상품 정보
Product name: Pure copper rod four angle tungsten steel seal cutting knife (roll leather case+small grinding disc)
[Process]: edge grinding (without cutting hands)
[Features]: Tungsten steel for cutter head, pure copper for rod body. Hands are heavy and stainless. The handle is very close to the whole material
[Specification]: 10mm, 8mm, 6mm, with a total length of about 14.5 and an included angle of about 40 degrees. (There will be a little tolerance after manual four side fine grinding, please forgive me!)
[Purpose]: seal engraving, seal engraving and button carving
[Leather strip material]: the first layer of cow leather, with random color
[Instructions for use of cemented tungsten steel seal cutting knife]:
1. Only printed materials such as organic glass (Qingtian, Shoushan, Bahrain, Liaoning Frozen Stone, etc.) should be engraved on stone seals. It should not be used on hard materials such as jade, porcelain, crystal, pebbles, marble, bluestone, etc.
2. Do not strike the tail with a hammer during engraving to prevent breakage.
3. The cutting edge shall be prevented from being damaged by falling on hard ground such as cement and ceramic tile floor.
4. If the blade becomes blunt after a long time of engraving, please polish it on the 1000 grain size diamond abrasive disc or the diamond small grinding disc we send.
The following picture shows three sets of copper rods at four corners:
